Building the Tridarka Raider
Chief builds hull #1 for the Everglades Challenge 2007
Welcome to
Tridarka Boat Works

Building the Vaka

CP1 Filter Mode

Print the article

This entry was posted on 7/16/2007 8:47 AM and is filed under Trailering.

As many of you know checkpoint 1 has a nasty little filter (for class 4) comprised of a low bridge with pilings about 10 feet apart.  This means the mast has to be dropped and many multihulls have to somehow reduce their overall beam.  The Tridarka Raider has a normal beam a bit wider that 12 feet.  Also the beam has be reduced to less than 8.5 feet for trailering.  We satisfied these limits by designing split aka.

Here is how the boat looks with the amas shoved in a few feet on each side.


The PVC pipe is just a mock up of the side supports.  The overall width in this mode is 8 feet 2 inches.  Note that the boat can be paddled in this configuration.  In good weather and with a reef in she can even be sailed.  This might be useful in the narrow sections of a river.


Here's a view from the front quarter.

 del.icio.us  Stumbleupon  Technorati  Digg 

 

What did you think of this article?




Trackbacks
Trackback specific URL for this entry
  • No trackbacks exist for this entry.
Comments
    • No comments exist for this entry.
Leave a comment

Submitted comments will be subject to moderation before being displayed.

 Enter the above security code (required)

 Name

 Email (will not be published)

 Website

Your comment is 0 characters limited to 3000 characters.